简单简介

在3DM Mod站下载上古卷轴5：重置版最新的方便马匹启动任务跳过 Mod,由mitchalek制作。hwdfj07在我们的平台上分享了这个免费且高质量的游戏模组,让玩家们可以享受到更加丰富的游戏体验。快来3DM Mod站下载并尝试吧!

详细介绍

Mod作者: mitchalek Mod版本: 1.0 Mod大小: 164 B 更新时间: 2018-09-07 18:19:33 发布时间: 2018-09-07 18:19:33

详细说明

我不会为他提供支持。这是按原样提供的，不提供任何担保或保证。如果你想改变原来的mod“Convenient Horses”，请留下原作者。

如果您使用方便马并且还没有这样做，请确保给予原始mod / author的kudos / likes / upvotes / whatever。

直接从Convenient Horses页面列出

玩家厌倦了必须重播每个新游戏的介绍任务。很多人希望能够跳过介绍任务并且我知道，但我不会在游戏中制作任何新的快捷方式以允许它，因为这会破坏目的。介绍任务有两个目的。一个允许新玩家快速适应和了解大量的mod功能。另一个是将mod功能更好地集成到游戏中，因此它不会打破沉浸感。像游戏中的任何任务一样，它可以使用游戏内控制台进行操作：“GetStage CHIntro”检索#stage，然后使用“SetStage CHIntro #stage”逐步增加10，直到设置阶段100。

经过几次介绍性任务，我对所有标准命令和过程非常熟悉。我刚刚在新游戏开始时使用BAT操作来跳过它们。如果你在记住运行BAT操作之前挂马，或者在中途跳过并决定跳过，（〜调出控制台，然后在命令中输入“bat ch”）然后手动输入：

“GetStage CHIntro”和输出的任何数字（例如20）都以

“SetStage CHIntro 30”然后

“SetStage CHIntro 40”（并在控制台中键入并完成“SetStage CHIntro 100”之前的数字加10。）

下午使用这个：

- 你需要装备你的马哨，并希望你的马足够接近“听到”使用时的哨子（或只是站在马旁边）。然后，按照标准操作打开马容器，并将喇叭从包中取出。一旦你掠夺'马呼叫'号角，你就可以使用召唤马的能力来召唤骏马，而不是直到。

- 如果您不熟悉控件/ CH如何工作（只是安装它，远离SSE一段时间等）请勿跳过启动问题。只需花费额外的几分钟就可以完成所有事情以刷新自己，或者学习基本设置。您可以稍后再使用它。

创建BAT文件 -

打开你的Skyrim SE文件夹和（不在数据文件夹中）创建一个名为<你想要它命名的新文本文件> .txt（我使用CH.txt'C'代表“方便”和'H'代表“马”......这不是太难了吗？）并打开那个文本文件，并粘贴以下几行：

SetStage CHIntro 10

SetStage CHIntro 20

SetStage CHIntro 30

SetStage CHIntro 40

SetStage CHIntro 50

SetStage CHIntro 60

SetStage CHIntro 70

SetStage CHIntro 80

SetStage CHIntro 90

SetStage CHIntro 100

保存文件并开始新游戏。〜调出控制台，“蝙蝠<你在这里设置的文件名>”或者在我的情况下 - “bat ch”

基本Skyim BAT 101.仅作为NMM / Vortex手动下载/无论当前调用什么，它都不允许访问除DATA子目录之外的任何内容。这个文件不会去那里。它是Skyrim SE EXE的所在地。（是的，我知道其他现实存在，离开。如果你想把它放在其他地方，那就去做吧。）

我为什么要这样做？如果我几个月后最终忘记了，我现在直接指示我最初是如何使用原始报价和所有。我猜你是否可以使用它，太棒了？

————————————————————————————————————————————————————————————

I will NOT be providing support for his. This is provided AS IS with NO WARRANTY or GUARANTEE. If you want changes to the original mod "Convenient Horses" go leave them for the original author.
If you use Convenient Horses and haven't done so yet, make sure to give kudos/likes/upvotes/whatever to the original mod/author.

Listed directly from the Convenient Horses page

Player is bored of having to replay intro quest on every new playthrough. Alot of people would like to be able to skip the intro quest and I know that, but I'm not going to make any new shortcuts in the game to allow it because that would defeat the purpose. The intro quest has two purposes. One to allow new players to quickly adapt and learn about the vast amount of mod features. The other to better integrate mod features with the game, so it doesn't break the immersion. Like any quest in the game it can be manipulated using the in-game console: "GetStage CHIntro" to retrieve the #stage and then increment in steps of 10 using "SetStage CHIntro #stage" until stage 100 is set.

Having gone through the introductory quests several times, I am quite familiar with all of the standard commands and processes. I just use a BAT operation at the start of my new games to skip through them now. If you mount a horse before remembering to run the BAT operation or get partway through and decide to skip, (~ to bring up console then "bat ch" in command) then type manually:
"GetStage CHIntro" and whatever number is output (20 for example) start with
"SetStage CHIntro 30" then
"SetStage CHIntro 40" (and add 10 to the number till "SetStage CHIntro 100" is typed and completed in the console.)

DOWNSIDES TO USING THIS:
-You WILL need to equip your horse whistle and hope your horse is close enough to "hear" the whistle when used (or just stand next to the horse). Then, open the horse container in accordance with standard operations, and loot the horn out of the bag. Once you loot the 'horse call' horn, you can then use the call horse ability to summon the steed, and not until.
- If you are not familiar with the controls/how CH works (just installed it, been away from SSE for a while, etc) DO NOT SKIP THE STARTUP QUESTS. Just take the few extra minutes and complete everything to refresh yourself, or learn the basic setup. You can use this later.

TO CREATE THE BAT FILE -
Open your Skyrim SE folder and (NOT IN THE DATA FOLDER) create a new text file called <whatever you want it to be named>.txt (I use CH.txt 'C' standing for "Convenient" and 'H' standing for "Horses" .... this isn't too difficult is it?) and open that text document, and paste the following lines:
SetStage CHIntro 10
SetStage CHIntro 20
SetStage CHIntro 30
SetStage CHIntro 40
SetStage CHIntro 50
SetStage CHIntro 60
SetStage CHIntro 70
SetStage CHIntro 80
SetStage CHIntro 90
SetStage CHIntro 100

Save the file and start a new game. ~ to bring up the console, and "bat <what ever file name you set here>" or in my case - "bat ch"

Basic Skyim BAT 101. Manual download only as NMM/Vortex/Whatever it's currently called does not allow access to anything but the DATA subdirectory. This file does NOT go there. It goes where the Skyrim SE EXE is found. (YES I KNOW other realities on this exist, go away. If you want to put it somewhere else, then do it.)

Why am I doing this? In case I eventually forget after a few months, I now have a direct instructions to how I originally did it with original quotes and all. I guess if you get use out of it, great?

方便马匹启动任务跳过

标签

资源介绍

详细介绍

简单简介

详细介绍

详细说明

文件说明

Mod截图

相关作品

hwdfj07的其他作品