简单简介
在3DM Mod站下载上古卷轴5：重置版最新的复古天际 Mod,由Miklelottesen制作。paisiwai在我们的平台上分享了这个免费且高质量的游戏模组,让玩家们可以享受到更加丰富的游戏体验。快来3DM Mod站下载并尝试吧!
详细介绍
Mod作者: Miklelottesen Mod版本: 0.10 Mod大小: 9.43KB 更新时间: 2020-07-20 08:32:57 发布时间: 2020-07-20 08:32:57
详细说明
注意：此mod不会提高性能，它纯粹是美学。但是，可以降低某些图形质量设置而不会引起任何可见的差异。
有没有想过如果在90年代中期的老式CRT显示器上渲染Skyrim会是什么样子？别再奇怪了，因为此ENB预设恰好实现了这一点。
90年代的DOS游戏缺乏渲染细节纹理的保真度，因此需要一定的想象力来填补空白。以完全不同的方式体验天际世界。尽管失去了保真度和色彩，您会惊讶于游戏的表现如何。
这种后处理效果仅影响正常的游戏视图和加载屏幕-不会影响UI，世界地图或库存屏幕中呈现的3D模型。
安装
下载并安装最新版本的ENB for Skyrim SE（此处）。使用包装器版本。如果您已经安装了ENB预设（包装器版本），请将其删除并将ENB还原为原始状态。
将zip文件的内容复制到Skyrim根安装目录中。覆盖所有文件。进行备份始终是一个好主意，以防您想返回。或者，您可以删除“ enbseries”文件夹，然后重新安装ENB包装器。
打开Skyrim SE启动器。禁用抗锯齿并退出启动器（跳过此步骤可能会导致闪烁）。
如果您使用的游戏分辨率为1920x1080，则可以使用。如果没有，请阅读以下内容。
像素化配置
此预设量身定制为1920x1080分辨率。如果使用不同的分辨率，则必须进行一些调整，否则仿真的分辨率将与预期的有所不同。
转到Skyrim install dir \ enbseries，然后打开文件“ enbeffectpostpass.fx.ini”。
将“分辨率降低比例”的值更改为更合适的值-请参见下表。
保存文件并开始游戏。
模拟分辨率是实际分辨率除以“分辨率降低比例”的值。这意味着，如果您的分辨率为1920x1080，则模拟分辨率为320x180。要以除1920x1080以外的任何其他分辨率实现相同（或足够接近）的模拟分辨率，请参考下表：
</ s> </ s> </ s>
-------------------------------------------------- ------------------
|游戏解析| “分辨率降低” |模拟分辨率|
-------------------------------------------------- ------------------
| 720x480（480p）| 3 | 240x160 |
| 720x576（576p）| 3 | 240x192 |
| 1280x720（720p）| 4 | 320x180 |
| 1920x1080（1080p）| 6 | 320x180 |
| 3840x2160（4k）| 12 | 320x180 |
| 7680x4320（8k）| 24 | 320x180 |
-------------------------------------------------- ------------------
设定值
可以调整此预设的某些参数以实现不同的效果，例如禁用像素化但保留后代化和抖动。若要更改设置，请编辑Skyrim install dir \ enbseries \ enbeffectpostpass.fx.ini或通过在游戏中按Shift + Enter来使用ENB游戏菜单，然后在右侧窗格中展开ENBEFFECTPOSTPASS折叠菜单。以下是可用设置的列表：
每个通道的颜色--有多少种红色，绿色和蓝色阴影可供选择。默认值为5，导致5 * 5 * 5 = 125种不同的颜色。
分辨率降级-将实际分辨率除以多少以达到模拟分辨率。 1表示没有缩小比例。默认值为6。
抖动强度-抖动效果应有多强。 0表示禁用。默认值为1。
抖动功率-增强或消除抖动效果的中间范围。默认值为1。
启用屏幕曲线-1 =启用，0 =禁用。是否应模仿CRT显示器的弯曲特性。默认值为1。
晕影强度-晕影效果的强度。默认值为1。
扫描线强度-模拟扫描线的强度。默认值为0.3。
扫描线速度-模拟扫描线的速度。默认值为1.4。
兼容性
该ENB预设通常应与所有mod兼容，除了其他ENB预设或Reshade（可能）。但是，考虑到效果的损失性质，建议不要使用任何照明模块，因为它们通常会引入很多（尽管是逼真的）黑暗，由于许多次要细节会丢失，因此会导致很多黑度。
高分辨率纹理mod可能是多余的，因为所有内容都是像素化的。但是，它们仍然会影响整体形象，因此鼓励进行实验。
————————————————————————————————————————
Note: this mod does not increase performance, it's purely aesthetic. However, it makes it possible to decrease certain graphic quality settings without causing any visible differences.
Ever wondered what Skyrim would look like if it was rendered on an old-school mid-90's CRT monitor? Wonder no more, as this ENB preset achieves just that.
DOS games of the 90's lacked the fidelity to render detailed textures, thus a degree of imagination was required to fill in the blanks. Experience the world of Skyrim in an entirely different way. You will be surprised at how well the game plays despite the loss of fidelity and colors.
This post-processing effect only affects the normal game view and loading screens - it does not affect UI, the world map or the 3D models rendered in the inventory screen.
Installation
Download and install the latest version of ENB for Skyrim SE (here). Use the wrapper version. If you already have an ENB preset installed (wrapper version), remove it and revert ENB to its original state.
Copy the contents of the zip file into your Skyrim root install dir. Overwrite all files. It's always a good idea to make a backup, in case you want to go back. Alternatively you can remove the "enbseries" folder and re-install the ENB wrapper.
Open the Skyrim SE launcher. Disable anti-aliasing and exit the launcher (skipping this step may result in flicker).
If the resolution you use for the game is 1920x1080, you are good to go. If not, read below.
Pixelation configuration
This preset is tailored to a 1920x1080 resolution. If you are using a different resolution, it's necessary to make some adjustments, or the emulated resolution will be different from the intended.
Go to Skyrim install dir\enbseries and open the file "enbeffectpostpass.fx.ini".
Change the value of "Resolution downscaling" to a more appropriate value - see the table below.
Save the file and start the game.
The emulated resolution is the actual resolution, divided by the value of "Resolution downscaling". This means that if your resolution is 1920x1080, the emulated resolution will be 320x180. To achieve the same (or a close-enough) emulated resolution with any other resolution than 1920x1080, refer to this table:
--------------------------------------------------------------------
| Game resolution | "Resolution downscaling" | Emulated resolution |
--------------------------------------------------------------------
| 720x480 (480p) | 3 | 240x160 |
| 720x576 (576p) | 3 | 240x192 |
| 1280x720 (720p) | 4 | 320x180 |
| 1920x1080 (1080p) | 6 | 320x180 |
| 3840x2160 (4k) | 12 | 320x180 |
| 7680x4320 (8k) | 24 | 320x180 |
--------------------------------------------------------------------
Settings
Some parameters of this preset can be adjusted to achieve different effects, such as disabling the pixelation but retaining the posterization and dithering. To change settings, either edit Skyrim install dir\enbseries\enbeffectpostpass.fx.ini or use the ENB in-game menu by pressing Shift+Enter when in the game and then, in the right hand pane, expand the ENBEFFECTPOSTPASS foldout menu. The following is a list of available settings:
Colors per channel-How many shades of red, green and blue are available. Default is 5, resulting in 5*5*5=125 different colors.
Resolution downscaling-How many times to divide the actual resolution to achieve the emulated resolution. 1 means no downscaling. Default is 6.
Dither strength - How strong the dither effect should be. 0 means disabled. Default is 1.
Dither power - Boost or un-boost the dither effect's middle ranges. Default is 1.
Enable screen curve - 1 = enable, 0 = disable. Whether the curvy nature of CRT monitors should be emulated. Default is 1.
Vignette strength - The strength of the vignette effect. Default is 1.
Scanline strength - The strength of the emulated scanlines. Default is 0.3.
Scanline speed - The speed of the emulated scanlines. Default is 1.4.
Compatibility
This ENB preset should generally be compatible with all mods, except for other ENB presets or Reshade (probably). However, given the loss-applying nature of the effect, it's recommended not to use any lighting mods, as they generally tend to introduce a lot of (albeit realistic) darkness, resulting in lots of blackness as many of the minor details are lost.
High-resolution texture mods may be redundant, as everything is pixelated. However, they still affect the overall image and experimenting is encouraged.
文件说明
暂无介绍
Mod截图
相关作品
DLC武器经销商（+附件）1.1修复 | 超越天际 - 布鲁玛 - 透视补丁的喜悦 | White Water HD | 城市：天际线 熊猫公园MOD | 上古卷轴5：天际重制版 大衮的试炼MOD | 更黑的夜 Darker Nights V 1.10.5 |